Holding down button doesn't move the volume up or down

[rhett7660]

Hello,

I might be missing something in the setup portion of my volume control, but I have the volume setup with a hold and press, to raise the volume up and/or down depending on the button being pushed. However it only goes up or down one click? Am I missing a check box click off since I thought based on the press and hold command it would continuously move up or down? I have a feeling I missed something.

I found this thread: viewtopic.php?f=7&t=21 but it doesn't tell me how to implement it, hence my question. Thanks

[DemoPad]

With the press/hold gesture type, you have the option to repeat actions - this means 'repeat whilst the button is being pressed' - typically 0.5 seconds is fine for IR commands, but you can have a play with the frequency.

Screen Shot 2018-01-23 at 20.36.02.png

[rhett7660]

With the press/hold gesture type, you have the option to repeat actions - this means 'repeat whilst the button is being pressed' - typically 0.5 seconds is fine for IR commands, but you can have a play with the frequency.

Screen Shot 2018-01-23 at 20.36.02.png

I knew I was missing something. Doh! Thank you.