Working with a Rako sytem

Tutorials for working with our software
Locked
User avatar
DemoPad
Site Admin
Posts: 769
Joined: Thu Jun 14, 2012 10:46 am
Contact:

Working with a Rako sytem

Post by DemoPad » Thu Jul 05, 2012 3:53 pm

Buttons & Gauges can be linked to Rako using the Rako Ethernet Bridge. You must have a device set
up as a ‘Rako Ethernet Bridge’ in the system. The default port for communication is 9761. The UDP
option must also be checked for Rako systems.

Select the ‘Link to Rako’ option & choose the Rako Bridge device from the drop down list. Then
specify the room that the object will link to, and in the case of a button, specify the scene number
(Off is scene 0). In the case of a gauge, specify the channel number.

Once set up, the buttons & gauges will operate the lighting system & reflect the state of the keypad
LEDs / lighting circuit levels. It is also possible to alter the individual channel levels by sliding your
finger up and down the gauge. For Rako buttons & gauges, it is important to specify the highlighted
image in order to see the feedback states.

Locked