4x4 Wyrestorm HDMI Matrix Commands

[member_c837]

Commands for a 4x4 Wyrestorm HDMI matrix.

[reflex1984]

Hi there, thanks for the .dc1 file. I am not able to control the mx0404-pp. I have used port 23 and \x0D\x0A command suffix. Is there anything else I need to do? I can monitor the matrix output when I switch manually on this port and see the responses as s10 (for output 1 input 1), s11 (for output 1 intput 2) etc. I hope you can help. Many thanks.

[DemoPad]

These commands may be for an older matrix, if you send the command s11, or a11 from DemoPad, does it work? Also try

cir 09

for output 1 to input 1, which is the RS232 command

Failing that, you'll need to contact Wyrestorm Technical Support who should be able to give you the definitive commands.

Suggest getting this working in Hercules (or other TCP software) before attempting in DemoPad.

[reflex1984]

Thanks for the reply.

I tried the RS232 commands over IP on the same port: cir 09 etc. and that works fine. I have a new matrix, so that was the issue.