Page 1 of 1
Onkyo IP Commands
Posted: Mon Jul 16, 2012 7:16 pm
by member_c837
IP Commands for Onkyo - keep default command suffix of \x0D\x0A, non-UDP. **Updated 6 May 2013**
Re: Onkyo IP Commands
Posted: Sun Oct 07, 2012 4:25 pm
by RedwingSystems
Thanks for posting the Commands. What Port and Command Suffix do you use as I'm struggling to get this is work?
Cheers
Re: Onkyo IP Commands
Posted: Sun Oct 07, 2012 8:12 pm
by DemoPad
You need to enable network control in the settings for the amp, the port is configurable there. The default suffix of \x0D\x0A works.
Re: Onkyo IP Commands
Posted: Mon Oct 08, 2012 7:41 pm
by RedwingSystems
Many thanks
Re: Onkyo IP Commands
Posted: Mon Apr 15, 2013 12:30 pm
by flinke flasche
Hi,
i have the NR717 Receiver.
Many Commands are not listed like BD Source or Ch+, Ch-.
Has anyone all IP Commands for the newer Models of Onkyo?
Tobias
Re: Onkyo IP Commands
Posted: Thu Apr 25, 2013 2:05 am
by sonnyjimspencer
Do you know the default port number for the device as my commands do not seem to be working? :/
Re: Onkyo IP Commands
Posted: Thu Apr 25, 2013 1:01 pm
by DemoPad
Think default port is 60000/60128, but it can be set from the menu. Think you also need to enable remote control via IP in there as well.
Re: Onkyo IP Commands
Posted: Fri Apr 26, 2013 1:54 am
by sonnyjimspencer
It still doesnt seem to work. I have set a static ip address up on the onkyo device but cant see an option for the port settings. Is this ip control compatiable with the 414 model?
Re: Onkyo IP Commands
Posted: Fri Apr 26, 2013 8:25 am
by DemoPad
Onkyo provide a free app to control the 414 - suggest downloading that first & making sure it works through there. The 414 does allow IP commands. You can email
support@demopad.com for the protocol document, but I believe the commands are the same as those posted here.
Re: Onkyo IP Commands
Posted: Fri Apr 26, 2013 8:32 am
by flinke flasche
The default Port is 60128.
I got a newer IP List from Onkyo for newer models like my NR717.
I must promise to do not release the list
I dont know why?
Re: Onkyo IP Commands
Posted: Sat Apr 27, 2013 12:06 am
by sonnyjimspencer
Yes I had to use the new port number thank you. The original commands still work fine
Re: Onkyo IP Commands
Posted: Mon May 06, 2013 8:13 pm
by DemoPad
Command file above updated to include all the commands, courtesy of a DemoPad forum member - many thanks.
Re: Onkyo IP Commands
Posted: Mon May 20, 2013 11:32 pm
by Steve_Jones
Having some trouble getting even a simple "on" or "off" button to work Tx-NR 515,
Ive checked the Amp has an IP address which can be pinged, I have downloaded the command list at the start of this topic..
When I run the Test it says "Command Sent"
This is the string I am using
ISCP\x00\x00\x00\x10\x00\x00\x00\x08\x01\x00\x00\x00!1PWR01\x0D
The device is on port 60128 with UDP ticked,
The Amp works on the Onkyo remote on my HTC..
Any ideas, bit of a noob at all this here
thanks
steve
Re: Onkyo IP Commands
Posted: Tue May 21, 2013 12:19 pm
by Steve_Jones
Thanks for the commands, work a treat ..
Re: Onkyo IP Commands
Posted: Sat May 25, 2013 2:17 pm
by tgatlinjr
Steve_Jones wrote:Having some trouble getting even a simple "on" or "off" button to work Tx-NR 515,
Ive checked the Amp has an IP address which can be pinged, I have downloaded the command list at the start of this topic..
When I run the Test it says "Command Sent"
This is the string I am using
ISCP\x00\x00\x00\x10\x00\x00\x00\x08\x01\x00\x00\x00!1PWR01\x0D
The device is on port 60128 with UDP ticked,
The Amp works on the Onkyo remote on my HTC..
Any ideas, bit of a noob at all this here
thanks
steve
Hi -
This is the string I am using on my Onkyo TX-NR1008 -
ISCP\x00\x00\x00\x10\x00\x00\x00\x08\x01\x00\x00\x00!1PWR01\x0D and it works fine.
I believe the UDP should NOT be ticked.