Onkyo IP Commands

Share any commands you know or look here to find commands for your devices.
Post Reply
member_c837
Posts: 17
Joined: Wed Jun 20, 2012 2:34 pm

Onkyo IP Commands

Post by member_c837 » Mon Jul 16, 2012 7:16 pm

IP Commands for Onkyo - keep default command suffix of \x0D\x0A, non-UDP. **Updated 6 May 2013**
You do not have the required permissions to view the files attached to this post.

RedwingSystems
Posts: 6
Joined: Mon Jul 16, 2012 3:36 pm

Re: Onkyo IP Commands

Post by RedwingSystems » Sun Oct 07, 2012 4:25 pm

Thanks for posting the Commands. What Port and Command Suffix do you use as I'm struggling to get this is work?

Cheers

User avatar
DemoPad
Site Admin
Posts: 769
Joined: Thu Jun 14, 2012 10:46 am
Contact:

Re: Onkyo IP Commands

Post by DemoPad » Sun Oct 07, 2012 8:12 pm

You need to enable network control in the settings for the amp, the port is configurable there. The default suffix of \x0D\x0A works.

RedwingSystems
Posts: 6
Joined: Mon Jul 16, 2012 3:36 pm

Re: Onkyo IP Commands

Post by RedwingSystems » Mon Oct 08, 2012 7:41 pm

Many thanks

flinke flasche
Posts: 60
Joined: Tue Apr 02, 2013 2:21 pm

Re: Onkyo IP Commands

Post by flinke flasche » Mon Apr 15, 2013 12:30 pm

Hi,

i have the NR717 Receiver.
Many Commands are not listed like BD Source or Ch+, Ch-.

Has anyone all IP Commands for the newer Models of Onkyo?

Tobias

sonnyjimspencer
Posts: 7
Joined: Thu Jan 10, 2013 12:06 am

Re: Onkyo IP Commands

Post by sonnyjimspencer » Thu Apr 25, 2013 2:05 am

Do you know the default port number for the device as my commands do not seem to be working? :/

User avatar
DemoPad
Site Admin
Posts: 769
Joined: Thu Jun 14, 2012 10:46 am
Contact:

Re: Onkyo IP Commands

Post by DemoPad » Thu Apr 25, 2013 1:01 pm

Think default port is 60000/60128, but it can be set from the menu. Think you also need to enable remote control via IP in there as well.

sonnyjimspencer
Posts: 7
Joined: Thu Jan 10, 2013 12:06 am

Re: Onkyo IP Commands

Post by sonnyjimspencer » Fri Apr 26, 2013 1:54 am

It still doesnt seem to work. I have set a static ip address up on the onkyo device but cant see an option for the port settings. Is this ip control compatiable with the 414 model?

User avatar
DemoPad
Site Admin
Posts: 769
Joined: Thu Jun 14, 2012 10:46 am
Contact:

Re: Onkyo IP Commands

Post by DemoPad » Fri Apr 26, 2013 8:25 am

Onkyo provide a free app to control the 414 - suggest downloading that first & making sure it works through there. The 414 does allow IP commands. You can email support@demopad.com for the protocol document, but I believe the commands are the same as those posted here.

flinke flasche
Posts: 60
Joined: Tue Apr 02, 2013 2:21 pm

Re: Onkyo IP Commands

Post by flinke flasche » Fri Apr 26, 2013 8:32 am

The default Port is 60128.

I got a newer IP List from Onkyo for newer models like my NR717.
I must promise to do not release the list :roll: :?: I dont know why?

sonnyjimspencer
Posts: 7
Joined: Thu Jan 10, 2013 12:06 am

Re: Onkyo IP Commands

Post by sonnyjimspencer » Sat Apr 27, 2013 12:06 am

Yes I had to use the new port number thank you. The original commands still work fine :)

User avatar
DemoPad
Site Admin
Posts: 769
Joined: Thu Jun 14, 2012 10:46 am
Contact:

Re: Onkyo IP Commands

Post by DemoPad » Mon May 06, 2013 8:13 pm

Command file above updated to include all the commands, courtesy of a DemoPad forum member - many thanks.

Steve_Jones
Posts: 7
Joined: Thu May 16, 2013 3:36 pm

Re: Onkyo IP Commands

Post by Steve_Jones » Mon May 20, 2013 11:32 pm

Having some trouble getting even a simple "on" or "off" button to work Tx-NR 515,

Ive checked the Amp has an IP address which can be pinged, I have downloaded the command list at the start of this topic..

When I run the Test it says "Command Sent"

This is the string I am using

ISCP\x00\x00\x00\x10\x00\x00\x00\x08\x01\x00\x00\x00!1PWR01\x0D

The device is on port 60128 with UDP ticked,

The Amp works on the Onkyo remote on my HTC..

Any ideas, bit of a noob at all this here

thanks

steve

Steve_Jones
Posts: 7
Joined: Thu May 16, 2013 3:36 pm

Re: Onkyo IP Commands

Post by Steve_Jones » Tue May 21, 2013 12:19 pm

Thanks for the commands, work a treat ..

tgatlinjr
Posts: 12
Joined: Sat Dec 08, 2012 3:44 am

Re: Onkyo IP Commands

Post by tgatlinjr » Sat May 25, 2013 2:17 pm

Steve_Jones wrote:Having some trouble getting even a simple "on" or "off" button to work Tx-NR 515,

Ive checked the Amp has an IP address which can be pinged, I have downloaded the command list at the start of this topic..

When I run the Test it says "Command Sent"

This is the string I am using

ISCP\x00\x00\x00\x10\x00\x00\x00\x08\x01\x00\x00\x00!1PWR01\x0D

The device is on port 60128 with UDP ticked,

The Amp works on the Onkyo remote on my HTC..

Any ideas, bit of a noob at all this here

thanks

steve
Hi -

This is the string I am using on my Onkyo TX-NR1008 -

ISCP\x00\x00\x00\x10\x00\x00\x00\x08\x01\x00\x00\x00!1PWR01\x0D and it works fine.

I believe the UDP should NOT be ticked.

Post Reply