Philips Hue Feedback

Share any commands you know or look here to find commands for your devices.
Post Reply
starwarsmike
Posts: 145
Joined: Mon May 13, 2013 12:48 pm

Philips Hue Feedback

Post by starwarsmike » Sat Nov 04, 2017 8:53 am

Hi

Has anyone successfully managed to get Philips hue feedback working? for some reason I just can get mine working?

I can send a command no problem to all my lights, using the Hue debug I get this response each time I turn light on or off.

[
{
"success": {
"/lights/1/state/on": false
}
}
]

So, In feedback I setup "feedback matches specific data" = "/lights/2/state/on": false. Setup up a standard label (with text saying light off)l and attached label to a button in text section dynamic label. I've also tried "feedback matches a pattern"

In feedback response terminator i have tried \x0D & \x0A and both, nothing works

Any help appreciated

cv27
Posts: 228
Joined: Sat Nov 24, 2012 10:15 pm
Location: Montréal, QC, Canada

Re: Philips Hue Feedback

Post by cv27 » Sat Nov 04, 2017 9:44 pm

Just a hunch but have you tried to debug with Hercules or whatever to visualize what the Hex terminator actually is in the Hue responses?

Just a wild guess, but that double quote, although legal AFAIK, might cause issue. You may want to replace it with a dot.

AKWillows
Posts: 51
Joined: Mon Aug 25, 2014 5:46 pm

Re: Philips Hue Feedback

Post by AKWillows » Mon Nov 26, 2018 10:24 pm

Did anyone get this working?

Post Reply