DemoPad.com

Commands for Pioneer AV Receiver VSX Series

Charles wrote:Commands for Pioneer AV Receiver VSX Series

Was this IP or IR commands ?

Thanks

kasmonkey wrote:

Charles wrote:Commands for Pioneer AV Receiver VSX Series

Was this IP or IR commands ?

Thanks

They are IP commands

They are the same commands both for IP and RS232

Hi,
Does anyone know what port number the Pioneer VSX amps shouild be on please?
Ta,
Andy

Mine (VSX 922) works on port 23 so you could try that.... I found that the IP commands for up, down left, right and enter don't work so I use IR instead (via a Global Cache iTach WF2IR) - in case its a help...
Cheers, Chris

Thanks Chris,
I'll give it a go. I have an existing connection for IR from a GC wireless unit so it's not a problem. Only need the extra buttons that generally are not needed by the client.
Ta,
Andy

ChrisB75 wrote:... I found that the IP commands for up, down left, right and enter don't work so I use IR instead ...

On a VSX1021, the directional keys work, but there is a different set of IP commands for the Amp control and HMG control.

Hi,

i downloaded these cmds but the Power On cmd does not work. Off is fine but Power ON not working.

Any idea anyone?

Kind of urgent!

Thanks.

Balj.

Hi,

the VXS922 Power ON i am using is "PO" but doesnt work.

I tried to learn the IR cmd and get the following:

[POWER_VSX] sendir,1:1,1,40322,1,1,342,170,22,63,22,21,22,63,22,21,22,21,22,63,22,21,22,63,22,21,22,63,22,21,22,63,22,63,22,21,22,63,22,21,22,21,22,21,22,63,22,63,22,63,22,21,22,21,22,21,22,63,22,63,22,21,22,21,22,21,22,63,22,63,22,63,22,1087

But that doesnt seem to work either.

Could someone who has IP and/or IR cmd for VSX922 be able to send them to me?

Would be greatly appreciated!

Balj.

Baljy74

You say the PO command doesn't work, have you tried sending the PO command Twice, My Pioneer LX83 Protocol says send twice. Worth a try...

Also PZ is power on/power off, toggle command

Michael

Thanks. Will try that...