Page 1 of 1

Enigma2 (VU+) Feedback (XML) in Demopad

Posted: Tue Jul 14, 2015 10:59 pm
by flinke flasche
Has anyone the feedback-code for Enigma Sat-Device?

To get the following XML file I use "192.168.0.19/web/getcurrent"
<e2currentserviceinformation>
<e2service>...</e2service>
<e2eventlist>
<e2event>
<e2eventservicereference>1:0:19:EF75:3F9:1:C00000:0:0:0:</e2eventservicereference>
<e2eventservicename>ProSieben HD</e2eventservicename>
<e2eventprovidername>ProSiebenSat.1</e2eventprovidername>
<e2eventid>20827</e2eventid>
<e2eventname>Mom</e2eventname>
<e2eventtitle>Mom</e2eventtitle>
<e2eventdescription>Alle hassen Christy, Sitcom, USA 2015</e2eventdescription>
<e2eventstart>1436906595</e2eventstart>
<e2eventduration>1584</e2eventduration>
<e2eventremaining>1309</e2eventremaining>
<e2eventcurrenttime>1436906870</e2eventcurrenttime>
<e2eventdescriptionextended>
Nachdem Gabriel als Manager des Restaurants überraschend entlassen wird, übernimmt die frustrierte Christy seinen Posten. Doch die Freude über den unerwarteten Karriereschub währt nicht lange ... Regie: Ted Wass Drehbuch: Nick Bakay, Britté Anchor Kamera: Steven V. Silver Schnitt: Skip Collector Darsteller: Anna Faris (Christy) Allison Janney (Bonnie) Sadie Calvano (Violet) Nate Corddry (Gabriel) Amy Hill (Beverly) French Stewart (Rudy) Charlie Robinson (Mr. Munson) Blake Garrett Rosenthal (Roscoe) Courtney Henggeler (Claudia)
</e2eventdescriptionextended>
</e2event>
<e2event>...</e2event>
</e2eventlist>
</e2currentserviceinformation>
I'm searching for the Feedback code for <e2eventservicename>ProSieben HD</e2eventservicename>

Re: Enigma2 (VU+) Feedback (XML) in Demopad

Posted: Sun Jul 26, 2015 8:56 pm
by flinke flasche
I've found the solution to get feedback from an Enigma2 Sat Receiver.


1.
Set up your Sat Receiver like in the picture.
Device.jpg
2.
create a command für your feedback like for current Infos
currentcode.jpg
3.
Create a Feddback command.
In my case for the title of the current movie.
feedback.jpg

Re: Enigma2 (VU+) Feedback (XML) in Demopad

Posted: Sun Jul 26, 2015 8:59 pm
by flinke flasche
4.
create a Label and display the feedback on a dynamic label.
dynamic_label.jpg
5.
you must send the command you created in step 2 before you will get the feedback

6.
upload to iPad