Device upload problem

Forum to ask for any help
Post Reply
elliott138
Posts: 2
Joined: Tue Sep 24, 2013 10:34 am

Device upload problem

Post by elliott138 » Thu Sep 26, 2013 10:02 pm

Hi guys,

I'm having major issues uploading my remote to my iPad mini, this has only occurred in the last 2 nights. It keeps saying there is a network error but both my iPad and laptop are on the same network and I've tried a wired connection but still has the same problem.

Is there something I'm missing?

member_258
Posts: 7
Joined: Mon Jul 16, 2012 3:36 pm

Re: Device upload problem

Post by member_258 » Wed Oct 09, 2013 9:40 am

Have seen intermittent issues with this. Restart PC, kill Dpad on iPad. Close all apps on ipad. Restart ipad

The try again. If no luck, connect PC with ethernet (not wifi) and try upload again (PC IP address will change so update in dpad project settings)

Havent been able to pin this down but usuaully a round of restarts solves it

Idealhomes
Posts: 144
Joined: Mon Jul 16, 2012 3:35 pm
Location: New Zealand
Contact:

Re: Device upload problem

Post by Idealhomes » Wed Oct 09, 2013 10:08 am

Another thing to double check is the Project File Name:, make sure there is no spaces in the .Pad file and the .Pad file and Project File Name are exactly the same.

Pretty well just double check the Project Location and File Name are the same in the App settings.

Good luck :)
"Setting the Standard in Quality and Commitment"

Post Reply