Search found 741 matches
- Tue Mar 20, 2018 11:55 am
- Forum: Help Forum
- Topic: Two lines of text in a rectangular button
- Replies: 2
- Views: 3421
Re: Two lines of text in a rectangular button
You can only have 1 line of text on the iOS app using a button I'm afraid, designer software incorrectly wraps. You can use a text label though, placed on top of the button.
- Mon Mar 19, 2018 10:21 am
- Forum: Help Forum
- Topic: Help to control Yamaha RX-A3060 IP
- Replies: 5
- Views: 9058
Re: Help to control Yamaha RX-A3060 IP
try port 50000, and command:
@MAIN:PWR=On
@MAIN:PWR=On
- Sun Mar 18, 2018 8:20 pm
- Forum: Help Forum
- Topic: iPad page scrolling
- Replies: 27
- Views: 80298
Re: iPad page scrolling
It works exactly the same way on a button press yes.
And yes - the large transparent button must be 'behind' the other buttons, but you can do that with the 'send to back' option on the leftmost menu. Or you can just have a smaller defined area not covered by other buttons on which to swipe.
And yes - the large transparent button must be 'behind' the other buttons, but you can do that with the 'send to back' option on the leftmost menu. Or you can just have a smaller defined area not covered by other buttons on which to swipe.
- Sat Mar 17, 2018 6:53 pm
- Forum: Help Forum
- Topic: iPad page scrolling
- Replies: 27
- Views: 80298
Re: iPad page scrolling
If the subpage was the same size as the main page, you can scroll entire pages if you want.... Gesture swipe with a transparent button on your main page sounds like your best bet - to do page jumps. Delays are not cumulative, so I assume your delays are: 0.3 send command 0.6 send command 0.9 send co...
- Sat Mar 17, 2018 12:16 pm
- Forum: Help Forum
- Topic: iPad page scrolling
- Replies: 27
- Views: 80298
Re: iPad page scrolling
Any subpage can scroll - by making the scrollable height/width smaller than the total height/width.
Please see http://designer.docs.demopad.com/pages/subpages/
Alternatively, you could use a gesture action (swipe left/right etc) to set flags which show different subpages
Please see http://designer.docs.demopad.com/pages/subpages/
Alternatively, you could use a gesture action (swipe left/right etc) to set flags which show different subpages
- Thu Mar 15, 2018 9:59 am
- Forum: Help Forum
- Topic: IPad Air in my project, the pages are much to big
- Replies: 15
- Views: 16515
Re: IPad Air in my project, the pages are much to big
Set brightness is one of the action types, like send a command or set a flag etc. Use a value between 0-100
- Wed Mar 14, 2018 10:44 pm
- Forum: Help Forum
- Topic: IPad Air in my project, the pages are much to big
- Replies: 15
- Views: 16515
Re: IPad Air in my project, the pages are much to big
Q1: click on a button, go to gesture actions - press and hold, those actions can repeat. Q2: use a flag, and the reveal menu Q3: yes, using the 'set brightness' action type, and the 'disable auto lock' action type. Q4: by typing the name of the iOS font in the drop down list in Designer - if the fon...
- Wed Mar 14, 2018 9:08 am
- Forum: Help Forum
- Topic: IPad Air in my project, the pages are much to big
- Replies: 15
- Views: 16515
Re: IPad Air in my project, the pages are much to big
For this, if you get rid of the background image you can see through the button transparency, and put the background image back later.
- Tue Mar 13, 2018 6:22 pm
- Forum: Help Forum
- Topic: IPad Air in my project, the pages are much to big
- Replies: 15
- Views: 16515
Re: IPad Air in my project, the pages are much to big
If you are using more than one device to transmit commands and you are not using one of the Centro products then yes you will need to purchase the in-app purchase. To be clear, the in app purchase applies if you are not using a Centro, and have more than one target device for your IP commands, eg a...
- Tue Mar 13, 2018 8:57 am
- Forum: Help Forum
- Topic: IPad Air in my project, the pages are much to big
- Replies: 15
- Views: 16515
Re: IPad Air in my project, the pages are much to big
There is an in app purchase in CentroControl if you are using >1 device, and not using a Centro.
- Mon Mar 12, 2018 10:35 pm
- Forum: Help Forum
- Topic: IPad Air in my project, the pages are much to big
- Replies: 15
- Views: 16515
Re: IPad Air in my project, the pages are much to big
Have you added the subpages to the main page? see http://designer.docs.demopad.com/pages/subpages/ You can send in your project to support@demopad.com and we will take a look. Please note you should really be using the CentroControl app, DemoControlHD is only on the app store for legacy systems / ol...
- Sat Mar 10, 2018 12:36 pm
- Forum: Help Forum
- Topic: IPad Air in my project, the pages are much to big
- Replies: 15
- Views: 16515
Re: IPad Air in my project, the pages are much to big
You should use 768x1024 resolution for any iPad. To make use of the retina display, use the 50% scaling option for images in the designer software, eg using our Pro Set Retina graphics. The images are not altered when sent to the iPad, so retina devices will display them at full resolution.
- Sat Mar 10, 2018 12:33 pm
- Forum: Help Forum
- Topic: Sending Commands - Need Help
- Replies: 18
- Views: 1132145
Re: Sending Commands - Need Help
You cannot test buttons, but you can test commands - via pre-defined commands, 'Test Command' option. A response 'command sent' means the IP address/port was correct & the command could be sent (it might not necessarily be the correct command though), 'Command Failed' means the connection could not ...
- Fri Mar 09, 2018 11:02 am
- Forum: Help Forum
- Topic: Sending Commands - Need Help
- Replies: 18
- Views: 1132145
Re: Sending Commands - Need Help
Global Cache units only understand GC "sendir" commands. iRule must convert them if you were entering pronto codes there, but it may have added a repeat to the code (the number after the 40000 frequency value) Does the IR LED flash on the GC unit when you test the command? When you test the command,...
- Mon Mar 05, 2018 11:07 am
- Forum: Help Forum
- Topic: iPhone X
- Replies: 2
- Views: 3900
Re: iPhone X
iOS app version 2.1.9 or later, with PC software version 2.343 or later supports iPhone X. Resolution to use is in the drop down for new projects: 375 x 812