Search found 81 matches

by rhett7660
Fri Feb 02, 2018 4:16 am
Forum: Help Forum
Topic: Button with Text after pressed, stays Highlighted
Replies: 12
Views: 21687

Button with Text after pressed, stays Highlighted

Hello, I have a transparent button with words on it. I have the Highlight whilst pressed checked along with the disable greyout and the color is set to a different color then what the text is. I have these buttons on a subpage that comes in from the left and if the command calls for a jump to anothe...
by rhett7660
Mon Jan 29, 2018 8:50 pm
Forum: Help Forum
Topic: iPad Gestures - inlew of switching to their remote?
Replies: 15
Views: 37515

Re: iPad Gestures - inlew of switching to their remote?

DemoPad wrote:
Mon Jan 29, 2018 5:15 pm
rhett7660 wrote:
Mon Jan 29, 2018 4:32 pm
I am assuming you can have a single button with say four different gestures correct? Swipe L/R/U/D for example?
Correct - each gesture type has its own independent action list
Great!!!!

Thank you
by rhett7660
Mon Jan 29, 2018 4:32 pm
Forum: Help Forum
Topic: iPad Gestures - inlew of switching to their remote?
Replies: 15
Views: 37515

Re: iPad Gestures - inlew of switching to their remote?

Any button can have gesture actions - go to the gesture actions menu & choose the actions to perform when the button is swiped left, right etc. The effect with the trailing lights is done with image sets which are usually hidden, but revealed when flags are set, to give the effect of moving lights....
by rhett7660
Mon Jan 29, 2018 3:23 am
Forum: Help Forum
Topic: iPad Gestures - inlew of switching to their remote?
Replies: 15
Views: 37515

Re: iPad Gestures - inlew of switching to their remote?

I’ll look when I get home, but I think it’s under the free graphic set, it may even be called gesture. That’s where I think I saw it. When you swipe, it has a trailing light that fades out as you swipe across. I found the graphics, but there is nothing attached to them. Just the graphics themselves...
by rhett7660
Mon Jan 29, 2018 2:06 am
Forum: Help Forum
Topic: iPad Gestures - inlew of switching to their remote?
Replies: 15
Views: 37515

Re: iPad Gestures - inlew of switching to their remote?

ekkoville wrote:
Sun Jan 28, 2018 11:18 pm
I’ll look when I get home, but I think it’s under the free graphic set, it may even be called gesture. That’s where I think I saw it. When you swipe, it has a trailing light that fades out as you swipe across.
Ahhh ok, going to check it out and see if I can find it.
by rhett7660
Sun Jan 28, 2018 6:25 pm
Forum: Help Forum
Topic: iPad Gestures - inlew of switching to their remote?
Replies: 15
Views: 37515

Re: iPAD Gestures - inlew of switching to their remote?

Sticking with IP or RS232 control then, sounds like it is possible to use the gesture pad in the designer to do this? For cursor movement or volume/channel selections, it looks like this will work. The cursor pad in the demo on the iPhone looks great while sliding your thumb over it. It seems that ...
by rhett7660
Sun Jan 28, 2018 5:39 pm
Forum: Help Forum
Topic: Sending Commands - Need Help
Replies: 18
Views: 794045

Re: Sending Commands - Need Help

Yes, found that Sony must want the command sent more than once. I tried 2 and 3 in place of the 1 and both worked. I’ll have to be aware of that with all the commands. If you look at the graphic that is attached in this thread, you can see which module and then which location within that module if ...
by rhett7660
Sat Jan 27, 2018 9:59 pm
Forum: Help Forum
Topic: Sending Commands - Need Help
Replies: 18
Views: 794045

Re: Sending Commands - Need Help

I did have to change out some of the module and port number setting for the commands based on where the IR sensor was residing. I actually had to go into the GC database and pull from a couple different VSX. I pulled from the VSX Essential Commands Only along with the SX Series. I was able to get al...
by rhett7660
Sat Jan 27, 2018 9:45 pm
Forum: Help Forum
Topic: Feedback via IR or RS232
Replies: 6
Views: 34904

Re: Feedback via IR or RS232

Hello, Is it possible to get feedback via IR or is this something that is regulated via a RS232 connection? I am looking to add something for the volume/guage so I can see what the actual volume is currently on etc. Is this possible? I am using a VSX-03THX receiver that doesn't have an IP port. :cr...
by rhett7660
Fri Jan 26, 2018 4:54 am
Forum: Help Forum
Topic: Feedback via IR or RS232
Replies: 6
Views: 34904

Feedback via IR or RS232

Hello, Is it possible to get feedback via IR or is this something that is regulated via a RS232 connection? I am looking to add something for the volume/guage so I can see what the actual volume is currently on etc. Is this possible? I am using a VSX-03THX receiver that doesn't have an IP port. :cry:
by rhett7660
Tue Jan 23, 2018 11:57 pm
Forum: Help Forum
Topic: Holding down button doesn't move the volume up or down
Replies: 2
Views: 4436

Re: Holding down button doesn't move the volume up or down

With the press/hold gesture type, you have the option to repeat actions - this means 'repeat whilst the button is being pressed' - typically 0.5 seconds is fine for IR commands, but you can have a play with the frequency. Screen Shot 2018-01-23 at 20.36.02.png I knew I was missing something. Doh! T...
by rhett7660
Tue Jan 23, 2018 6:50 pm
Forum: Help Forum
Topic: Holding down button doesn't move the volume up or down
Replies: 2
Views: 4436

Holding down button doesn't move the volume up or down

Hello, I might be missing something in the setup portion of my volume control, but I have the volume setup with a hold and press, to raise the volume up and/or down depending on the button being pushed. However it only goes up or down one click? Am I missing a check box click off since I thought bas...
by rhett7660
Tue Jan 23, 2018 6:40 pm
Forum: Help Forum
Topic: Lutron Caseta - Can we control them?
Replies: 2
Views: 3281

Re: Lutron Caseta - Can we control them?

Thank you, I will have to check it out and experiment with it. I didn't see anything specific to Caseta which is why I asked. Right now, I have it opening up the actually app and then coming back to the app.

Thanks will take a look at it.
by rhett7660
Tue Jan 23, 2018 6:39 pm
Forum: Help Forum
Topic: iPad Gestures - inlew of switching to their remote?
Replies: 15
Views: 37515

Re: iPAD Gestures - inlew of switching to their remote?

Ah, ok. I am probably better off at this point either opening up the Apple Remote App or switching to the physical remote (which is what I am doing right now for the most part).
by rhett7660
Tue Jan 23, 2018 3:15 pm
Forum: Help Forum
Topic: iPad Gestures - inlew of switching to their remote?
Replies: 15
Views: 37515

Re: iPAD Gestures - inlew of switching to their remote?

Is there a tutorial on this? I am not familiar enough yet on how to assign XY coordinates to a button yet. In fact I have not seen or read about this from the items I have been able to track down via google search. It would be via IR since I don't think there is a way to control the Apple TV via IP,...