DemoPad.com

And the action when the feedbacks returns.
With this options the other buttons with the same feedback code turns also in the pressed style.
I don't know where is the error?

Please help

Hi, i'm very busy the last weeks so that i couldn't test it. Yesterday i had enough time to test, but re results are not what i imagined. Here is my fotostory :lol: These are the flags for the commands: 3D Dimension, 3D Brightness, 3D Conversion flags.jpg The code for one button: 3D Brightness low (...

Thanks,
i will test it an give a feedback.

Hi, I use the Epson TW9000 and the Global Cache WF2SL. I would like to have feedback for the following commands to change the active button view. - 3D Format (3D Auto, 2D, SbS, HoU,) - 3D Brightness (low, middle, high) - 3D Conversion (off, low, middle, high) Bildschirmfoto 2014-08-10 um 10.42.15.jp...

Hi i need help for some serial commands of my Epson TW9000. Normally the commands shows like this: PWR xx -> PWR ON, PWR OFF KEY xx -> KEY 03 (for Menu), KEY 05 (for ESC) ASPECT xx -> ASPECT 80 (for anamorphic), ASPECT 00 (Normal) I would like to have a direct remote code for 3D SBS, 3D Top and Bott...

I tested the Wake on lan code like in this tutorial. http://www.demopad.com/forum/viewtopic.php?f=7&t=31 The command takes time to work. It's a delay of 1-5 minutes until my HTPC turns on. :( I replaced my mac Adress to the code 16 times. \xFF\xFF\xFF\xFF\xFF\xFF\xmy\xIP\xad\xre\xss\x00\xmy\xIP\xad\...

I found a solution

I created a action in the 2way feedback.
Double click on any volume value and create an action:
(Action when feedback conditions occurs)
Set a Label, choose Name of Label, Data = 1 (or 2, 3, 4 etc.)

I have read this post, but it does not work or i don't understand it. :( for each Volume value i need a 2way feedback like: MVL01 -> 1 MVL3B -> 59 etc. right? On Page load i send the command !1MVLQSTN every 1 sec. that i receive the info. I would like to show wich level the Volume has. What is the n...

I need help to get a 2way feedback for the value.
I would like to show the number (Volume Level) on a Label.

The Get code is !1MVLQSTN but i get no info back.

Since the last update (and upload to the iPad mini) the repeating Buttons doesn't work.

- I changed nothing in the Software.
- I created the repeating Button like in the Demopad Tutorial.
- I have the newest software on both, iPad and PC.

Is there a Bug in the Software?

The Main Codes for the Epson TW9000 (and i think above)

Im use this codes with the Global Cache WF2SL.
Port 4999

This one works

<meta name =viewport content="width=500, initial-scale=0.75, minimum-scale=0.5 maxiumum-scale=1.0">

Hi, I'm useing XBMC and the Web Interface iAWX. Unfortunately ist the minimum width 600px but i have only 575px. I'm searching the web for solutions and found 2 different. 1. in HTML <meta name="viewport" content="width=device-width, initial-scale=1.0, user-scalable=no"> 2. in CSS body { zoom: 0.75;...

The default Port is 60128.

I got a newer IP List from Onkyo for newer models like my NR717.
I must promise to do not release the list I dont know why?

Hi,

i have the NR717 Receiver.
Many Commands are not listed like BD Source or Ch+, Ch-.

Has anyone all IP Commands for the newer Models of Onkyo?

Tobias