Search found 146 matches
- Mon Mar 17, 2014 6:58 pm
- Forum: Help Forum
- Topic: Help Beamax M-Series Projector Screen
- Replies: 2
- Views: 4674
- Sun Mar 16, 2014 2:08 pm
- Forum: Help Forum
- Topic: Help Beamax M-Series Projector Screen
- Replies: 2
- Views: 4674
Help Beamax M-Series Projector Screen
Hi
Looking for some help with my Beamax M-Series electric screen, screen has built in RF remote. What do I need to control it via Demopad?
Thanks
Michael
Looking for some help with my Beamax M-Series electric screen, screen has built in RF remote. What do I need to control it via Demopad?
Thanks
Michael
- Wed Mar 12, 2014 8:19 am
- Forum: Device Command Database
- Topic: Control your Sky via RS232
- Replies: 7
- Views: 20023
Re: Control your Sky via RS232
Just realized you might asking how to setup Redeye pro instead of Demopad. If so, I suggest to download Demopad and import the DCI file, then you can see the commands to use. I'v never used Redeye, but imagine you just setup the device same as Demopad and add the commands Demopad can you confirm? Mi...
- Wed Mar 12, 2014 8:13 am
- Forum: Device Command Database
- Topic: Control your Sky via RS232
- Replies: 7
- Views: 20023
Re: Control your Sky via RS232
Hi
Exactly as show in the post above, except, 5) Connect other end of the RS232 cable to the itach unit, connect to your Redye pro. Setup device (Redeye pro) in Demopad
Have you tried this yet?
Exactly as show in the post above, except, 5) Connect other end of the RS232 cable to the itach unit, connect to your Redye pro. Setup device (Redeye pro) in Demopad
Have you tried this yet?
- Sat Feb 22, 2014 8:23 pm
- Forum: Help Forum
- Topic: Thermostats
- Replies: 1
- Views: 4222
Thermostats
Hi
Is anyone controlling their heating Thermostate via DemoPad?, if so what Thermostate?
Thanks
Michael
Is anyone controlling their heating Thermostate via DemoPad?, if so what Thermostate?
Thanks
Michael
- Tue Feb 18, 2014 7:27 pm
- Forum: Device Command Database
- Topic: Philips Hue Lights
- Replies: 25
- Views: 73811
Re: Philips Hue Lights
Hi
not sure if this will help, but I had a similar problem with my Amp using a gauge. If you have ticked the box in gauge setting that states execute whilst sliding, then untick it.
Hope this maybe helps
Michael
not sure if this will help, but I had a similar problem with my Amp using a gauge. If you have ticked the box in gauge setting that states execute whilst sliding, then untick it.
Hope this maybe helps
Michael
- Mon Jan 27, 2014 7:53 pm
- Forum: General Discussion
- Topic: Capture IR with GC IR Learner
- Replies: 4
- Views: 10446
Re: Capture IR with GC IR Learner
Just copy&paste each command to device, if they are IR you don't need to do anything. If done in HEX copy & paste to device & use HEX convert for each command.
- Thu Jan 23, 2014 11:52 am
- Forum: Help Forum
- Topic: Battery Icon
- Replies: 2
- Views: 4645
Re: Battery Icon
if you untick hide status bar from Project settings /edit, you will get battery & time to show.
but if you are asking if you can pull battery data from IOS to Demopad, i would say no.
but if you are asking if you can pull battery data from IOS to Demopad, i would say no.
- Wed Jan 15, 2014 2:36 pm
- Forum: Help Forum
- Topic: Question for Demopad
- Replies: 2
- Views: 4501
Re: Question for Demopad
Demopad, can I have a response please?
Much appreciated
Michael
Much appreciated
Michael
- Sat Jan 11, 2014 11:45 am
- Forum: Help Forum
- Topic: XMBC
- Replies: 6
- Views: 7824
Re: XMBC
I understood what you said...... I said I didn't have any issue with control via Json commands. I could remote control it no problem. It was the web interface I had the issue with. For some reason it didn't like port 8080, but when I changed it to 8082 it worked.
Cheers again
Cheers again
- Sat Jan 11, 2014 11:41 am
- Forum: Help Forum
- Topic: Question for Demopad
- Replies: 2
- Views: 4501
Question for Demopad
Demopad I have DemoPad controlling all my devices(lights,amplifier,PC etc). I have to say it's great been able to control everything with I device via your app. However......when it comes to PC control I use WOL, start any program I want, use keyboard within Demopad using MCE VK commands, but the is...
- Fri Jan 10, 2014 4:50 pm
- Forum: Help Forum
- Topic: XMBC
- Replies: 6
- Views: 7824
Re: XMBC
Strange!! i take that back, you don't need 2 devices setup. I deleted it and changed the port to 8082 and it worked. seems other ports i tried didn't work....any got it going.
- Fri Jan 10, 2014 4:37 pm
- Forum: Help Forum
- Topic: XMBC
- Replies: 6
- Views: 7824
Re: XMBC
It's Ok, I got it working. I didn't appreciate that i needed to setup 2 devices, one on port 9090 and another on my chosen port for web interface.
Thanks again
Michael
Thanks again
Michael
- Fri Jan 10, 2014 4:21 pm
- Forum: Help Forum
- Topic: XMBC
- Replies: 6
- Views: 7824
Re: XMBC
Hi again I tried browser command.....http://192.168.1.203:746/jsonrpc?request={%22jsonrpc%22:%222.0%22,%22method%22:%22Input.Right%22,%22id%22:1} results = {"id":1,"jsonrpc":"2.0","result":"OK"} Presume this means it working? In my web view i have http://192.168.1.203:746 is this correct? I clean in...
- Thu Jan 09, 2014 11:13 pm
- Forum: Help Forum
- Topic: Bug on resume from sleep
- Replies: 12
- Views: 12701
Re: Bug on resume from sleep
What model of iPad you have and version of iOS are you all using. I noticed this issue sometimes on my iPad one but nothing like this ever happens on my new iPad mini.