DemoPad.com

Use a generic device with port 49153, with the default command suffix of \x0D\x0A. Limited commands are available - Play, Pause, Rewindx2,x6,x12,x30, FastForwardx2,x6,x12,x30

Please find attached a DemoPad command file for controlling Sky+ over IP using DemoPad. Send to a generic IP device on port 49153, with the default command suffix of \x0D\x0A.

Only limited commands are available at present, play, pause, rewindx2,x6,x12,x30, fastforwardx2,x6,x12,x30

Sounds like something is wrong there - please email support@demopad.com with a screenshot of what you are seeing.

Please download the software by first signing up at the address below:

Sign up here.

Hi - the IP2IR/WF2IR comes with 3 low power emitters and 1 blaster. The low power emitters will only work 1 piece of equipment at a time (unless pumped through an IR amplification/distribution system). They are typically stuck to the front panel of the equipment to be controlled. The blaster can con...

MAJOR GRAPHICS UPDATE: OK - in response to requests for professional, affordable graphics on this forum, and elsewhere - we have implemented the following as of today: You can now download, at no cost, DemoPad graphics sets from our online store. Two sets are currently available, in both standard an...

And here are the Global Cache IR commands, and RS232 / IP commands for the following models:

OR-HD22S
OR-HD24S
OR-HD42S
OR-HD44S
PU-O4H4C.

MAJOR GRAPHICS UPDATE: OK - in response to requests for professional, affordable graphics on this forum, and elsewhere - we have implemented the following as of today: You can now download, at no cost, DemoPad graphics sets from our online store. Two sets are currently available, in both standard an...

skygo:// works for the Sky Go app, but not sure about the Sky+ app - nothing obvious seems to work...

Global Cache IR, and IP / RS232 commands for CYP matrices, models:

PU-8H8HBT
PU-8H8HBTE
PU-4H4HBT
OR-HD88HC
OR-HD88S
OR-DVI88S
OR-DVI88SA

When the app loads, objects (of the same type) are drawn in the order that they were added to the page originally in designer. Copying / pasting then deleting the original etc is just a side effect. If you added 2 buttons to the designer on top of each other, the one you added last would be on top. ...

Presume when putting into DemoPad you used appropriate \x0D characters after each line - please refer to the Sonos POST commands, which are similar in format.

Using an IP camera server - the example video used an Aviosys 9100A unit, which takes 4 composite video signals in & generates a JPG image on the network. You then set up the app to refresh that image at a given rate & apply it to a button/image object on the GUI. We took the scart output of a sky b...

It looks like there is a web interface unit (online controller) which you can use - so the easiest way to integrate would be to use a web view in the software pointing to the online controller. More advanced direct control is most likely possible, but we'd need more information - we've not integrate...

The LINE IN command has a reference in it to stream:RINCON_xxxxxxxxxxxxxx - this should be changed to the local ID of the sonos zone player which has the line-in connected. This can be found by browsing to http://xxx.xxx.xxx.xxx:1400/status/zp (where xxx.xxx.xxx.xxx is the IP address of the zone pla...